It can be used for all OPTIM stile / rail models and frame doors.
An adjustable door frame is made for doors with or without a fold.
It has a maximum adjustment range of 500-520mm.
A frame with an adjustment of more than 280mm consists of 2 elements, and with an adjustment of more than 400mm there are 3 elements.
It can be adjusted up to 40mm .
There are instructions and a warranty sheet in the package.
Regulated door frame for reverse opening
A special doorway for reverse opening solves the problem when it is necessary for the door that opens inward to look the same as the door that opens outward.
Possible to use only with frame doors
Single plane with platband.
It is supplied with 2 hidden loops and a reciprocal level to the magnetic lock.
The package has instructions and a warranty sheet inside.
Fixed door frame
The fixed door frame is made for doors with a fold.
It can be used for all OPTIM stile / rail models and frame doors.
The frame is supplied with 3 screw loops and a reciprocal level to the usual lock.
The towers and the crossbar are cut in size. Reciprocal level, loops and a sealant are done at the factory, and also openings for other elements are already made.
The package has instructions and a warranty sheet inside.
Adjustable overhead door frame for old houses
An adjustable overhead frame is made for doors with a fold.
It can be used for all OPTIM stile / rail models and frame doors.
It has a maximum adjustment range of 440-460mm. A frame with an adjustment of more than 200mm consists of 2 elements, and with an adjustment of more than 340mm there are 3 elements. Adjustment is up to 40mm.
The frame is supplied with 3 screw loops and a reciprocal level to the usual lock.
The towers and the crossbar are cut in size. Reciprocal level, loops and a sealant are set up at the factory, and also openings for other elements are already made.
The package has instructions and a warranty sheet inside.
Hidden aluminium frame
The hidden box is made for doors with opening in and out.
Such creative solution allows to install the door in the same plane as the wall. It can only be used with the frame doors.
The ability to refine the door frame on the reverse side with the use of additional strips and platbands.
It is supplied with 2 or 3 hidden loops and a reciprocal level to the magnetic lock.
The towers and the crossbar are cut in size. Reciprocal level, loops and a sealant are made at the factory, and also openings for other elements are made at the factory too.
The package has instructions and a warranty sheet inside.
Monoblock frame
Monoblock frame is made for doors without a fold.
To adjust the girth of the wall, an additional plank and platbands can be ordered separately.
It is supplied with 2 or 3 hidden loops and a reciprocal level to the magnetic lock.
The towers and the crossbar are cut in size. Reciprocal level, loops and a sealant are set up at the factory, and also openings for other elements are made at the factory as well.
The package has instructions and a warranty sheet inside.
Classic frame
The classic telescopic frame is made for doors without a fold.
To adjust the girth of the wall, an additional plank and platbands can be separately ordered
It is supplied with 2 or 3 hidden loops and a reciprocal level to the magnetic lock.
The towers and the crossbar are cut in size. Reciprocal level, loops and a sealant are established at factory, and also openings under assembly elements are made.
The package has instructions and a warranty sheet inside.
Baseboard-skirtings
Flat baseboard
H=60/80/100мм t=14мм
Baseboard
H=80мм t=22мм
Figured skirting baseboard
H=110/200мм t=28мм
Capitals-crowns
Capital
KJ + racks K10 + PATINA elements
Capital
KJ + racks K10 + insertions
Capital
KR + racks K10 + PATINA elements
Capital
KR + racks K10 + insertions
Capital
KV + racks K10 + PATINA elements
Capital
KV + racks K10 + insertions
Capital
KW + racks K10 + insertions
Capital
KY + racks K10 + insertions
Capital
КM + racks К10 + insertions
Capital
PE 816 + Capital KD
Platbands-architrave
Door trim
141
Door trim
197
Door trim
214, 222
Door trim
407 + Patina elements
Door trim
407 + insertions
Door trim
407
Door trim
410 with door frame
Door trim
410 without door frame
Door trim
552
Door trim
553 + capital КС
Door trim
586
Door trim
709
Door trim
791
Door trim
791
A large assortment
Now OPTIM produces about 300 models
doors, each of which is available in different
sizes, colors, and configurations.
Work experience 20 years
For 20 years of existence, we were able to grow
from a door factory to the status of a group of companies. Today OPTIM Group is one of the leaders
on the door manufacturing market.
Quality assurance
Quality materials, new technologies
and the evolution of many years of experience in their business guarantee exceptional door quality.